MSC C7-SK-DV-EV

COM Express Type 7 Starterkit

The MSC C7-SK-DV-EV-KIT001 is a ready-to-run Starter Kit for COM Express Type 7 modules based on the Intel C3000 CPU. It is ideally suited for evaluation purposes, for software development and for prototyping of Type 7 applications.

It contains the new COM Express baseboard for Type 7 modules providing the interface infrastructure for the COM Express Type 7 modules with various PC type connectors for external access. In addition the Starter Kit comes with the suitable Heatsink with Fan for MSC C7B-DV and C7B-DVL modules, a PCIe Graphics Card, 2x DDR4 memory modules and a suitable ATX power supply.

The MSC C7-SK-DV-EV-KIT001 does not contain the COM Express module thereby leaving the choice of module variant to the user. The suitable MSC C7B-DV or C7B-DVL module should be ordered along with the Starter Kit.

Highlights

Starterkit for COM Express™ Type 7 modules with Intel “Denverton” C3000 CPU
Heatsink with Fan for MSC C7B-DV or C7B-DVL modules
2x 4GB DDR4 SODIMM
PCIe Graphics Card
Baseboard for Type 7 modules
Seven PCI Express slots x4 and x8
Two SATA connectors *
Four USB 2.0/3.0 connectors *
RJ45 LAN connector GbE

Two RJ45 LAN connectors 10GbE *
Two SFP+ Slots 10GbE *
SD Card socket
Super IO controller
Slot for optional BMC add-on card
POST code LED display
Various additional COM Express™ specific interfaces
ATX-style power connector / 12V-only jack
Size 305mm x 244mm
*Support depending on COM Express module used

Specs

Technology	COM Express Type 7 Starterkit
Formfactor	ATX
Flash	Socket for external BIOS Flash
Storage Interfaces	2x SATA 6Gb/s; SD Card socket
USB	4x USB 3.0 (USB 2.0 compliant)
Serial Interfaces	2x serial RS232 ports from COM Express module on pin-headers 2x serial RS232 legacy ports from Super I/O on pin-headers
Bus Interfaces	PCI Express™ One PCI Express x8 (on PCI Express x16 socket), six PCI Express x4 (on PCI Express x4 or x16 sockets); LPC/eSPI LPC/eSPI on 10-pin header;
Display Controller	PCIe Graphics Card enclosed
Display Interfaces	via optional BMC add-on card
Network Interface	2x RJ45 connectors for 10Gb LAN from COM Express module, 1Gb/s, 10Gb/s supported, 2x SFP+ connectors for 10Gb LAN from COM Express module, 1Gb/s, 10Gb/s supported, 1x RJ45 connector for 1Gb LAN from COM Express module, 10/100/1000 Mb/s supported
Miscellaneous	Feature connector Carrying SMBus, I²C bus, power button, reset button, beeper, HD LED and other system signals GPIO Four input, four output signals on a pin header; partially shared with SD Card socket Super I/O LPC/eSPI based Super I/O with 2x COM, LPT Fan 1x 4 pin fan connector; PWM controlled by COM Express module; EEPROM One serial EEPROM on SMB bus Two serial EEPROMs on I²C bus Battery CR 2032 type RTC battery (3V, socketed) POST code display 7-segment displays Buttons Power button Reset button Sleep button
Feature Highlights	Full featured carrier board for COM Express Type 7 pin-out
Power Requirement	ATX Power Supply enclosed Standard 20pin ATX power connector and additional ATX12V connector Additional power jack for single voltage supply (wide input range 12V to 20V)
Environment	Ambient Temperature: 0° … 85°C (operating, MSC C7-MB-EV only), -25° … 85°C (storage, MSC C7-MB-EV only) Humidity: 5 … 95% (operating, non-condensing), 5 … 95% (storage, non-condensing)
Dimensions	305mm x 244mm
Cooling	Heatsink with Fan enclosed
Memory	2x 4GB DDR4 SO-DIMMs

Order Info

Order No.	Description	Reference	Status
78029	Starterkit for COM Express Type 7 modules with Intel C3000 series processors. Consists of the MSC C7-MB-EV platform board for Type 7 modules, suitable heatsink with fan, two 4GB DDR4 memory modules, a graphics card and a suitable power supply with cable kit.	MSC C7-SK-DV-EV-KIT001	PV

PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessories

10.1″ Display kit

Order No.	Description	Reference
78879	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch).	MSC DIS-AM1280800-101-KIT SETPAC

12.1″ Display kit

Order No.	Description	Reference
78880	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)	MSC DIS-AM1280800-121-KIT SETPAC

5.0″ Display kit

Order No.	Description	Reference
81871	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 5.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)	MSC DIS-AM800480-050-KIT SETPAC

7″ Display kit

Order No.	Description	Reference
78911	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)	MSC DIS-AM800480-070-KIT SETPAC