MSC Q7-BT

Intel® System on Chip (SOC) Atom™ E3800

The MSC Q7-BT module is based on the Qseven Rev. 2.0 and using Intel’s multi-core System-On-Chip (SOC) Atom generation that integrates next generation Intel processor core, graphics, memory, and I/O interfaces into one solution. Based on Intel’s 22nm processor technology, this multi-core Atom processor provides outstanding computing and graphics power and is more power efficient compared to its predecessors. The new MSC Q7-BT brings dual independent display support, DirectX 11.1, fast DDR3L memory and USB 3.0 on a compact, power saving and cost-efficient Qseven Rev. 2.0 compatible module. Different SOCs with single-, dual- and quad-core processors are supported by this design. Next to an extensive set of interfaces and features, the MSC Q7-BT offers hardware based security compliant to the requirements of TCG (Trusted Computing Group). For evaluation and design-in of the MSC Q7-BT module, MSC provides a number of development platforms. A complete, ready-to-run Starterkit is also available.

Highlights

  • Intel® Atom™ System-On-Chip with Quad-/ Dual- /Single-Core Processor:
    • E3845 Quad-Core, 1.91 GHz, 10W TDP
    • E3827 Dual-Core, 1.75 GHz, 8W TDP
    • E3826 Dual-Core, 1.46 GHz, 7W TDP
    • E3825 Dual-Core, 1.33 GHz, 6W TDP
    • E3815 Single-Core, 1.46 GHz, 5W TDP
    • E3805 Dual-Core, 1.33 GHz, 3W TDP
  • Up to 4GB DDR3L SDRAM (opt. ECC)
  • Up to 64GB SATA Flash Disk (optional)
  • Up to 32GB eMMC Flash (optional)
  • 2x SATA-II interfaces (1 used for opt. Flash Disk) 
  • Integrated Intel Gen. 7 HD Graphics
  • HDMI up to 1920×1200
  • DisplayPort 1.1a up to 2560×1600
  • Dual-Channel LVDS 24 or 18 bit up to 1920×1200
  • Dual Simultaneous Display support
  • Gigabit Ethernet
  • 3x PCIe x1 Gen. 2.0 ports
  • USB 3.0 Host, optional USB 3.0 Device
  • Up to 6x USB 2.0 Host, optional USB 2.0 Device
  • UART, LPC, HD Audio, SPI, I2C, SMBus, SDIO, opt. TPM

Specs

Technology x86
Formfactor Qseven
CPU Intel® Atom™ E3845, E3827, E3826, E3825, E3815, E3805
Chipset in SOC
RAM up to 4 GB LVDDR3-1333 SDRAM, soldered
optional ECC
Flash optional on-board SATA Flash Disk up to 64 GB
optional in-board eMMC Flash up to 32GB
Storage Interfaces 2x SATA 3Gb/s
one optionally used for SATA Flash Disk
USB 1x USB 3.0 Host
up to 6x USB Host
optional USB 3.0 Device
optional USB 2.0 Device
Serial Interfaces I²C Bus
SMBus
SPI Bus
Bus Interfaces 3x PCI-Express x1 Gen. 2
LPC Bus
Display Controller Integrated Intel HD Graphics Gen. 7
Display Memory UMA
Display Interfaces HDMI up to 1920 x 1200 @60Hz
DisplayPort 1.1a up to 2560 x 1600 @60Hz
LVDS 18/24 bit, dual channel, up to 1920 x 1200 @60Hz
Network Interface 10/100/1000Base-TX
Audio Interface HD Audio (I2S optional)
Security Device TPM 1.2 optional
Miscellaneous Watchdog Timer:
Initiates system reset, (programmable, 1s … 255h)
Fan Supply:
PWM Speed Control for system fan on carrier board
RTC battery: external
System Monitoring:
Voltage, Temperature, CPU Fan, System Fan
Feature Highlights ECC controlled Memory
Optional TPM for Security
HDMI, DisplayPort outputs
Firmware AMI Aptio UEFI
OS Support Windows 7 / ES7 / 8 / 10
Windows EC7, EC2013
Linux
EAPI (HW Programming Interface)
Power Requirement +5V +/-5%, 5V Standby optional
Environment Operating Temperature:
0° … 60°C (operating, commercial)
-40° … 85°C (operating, industrial)
-20° … 85°C (storage, commercial)
-40° … 85°C (storage, industrial)
Humidity:
5 … 95% (operating, non-condensing),
5 … 95% (storage, non-condensing)
Dimensions 70mmx70mm
Certificates UL / CE
Cooling Heatspreader with threaded standoffs
Heatsink with threaded standoffs
Carrier Qseven Rev. 2.0 Carrier board in 3.5" (ECX) form factor
Carrier board for evaluation in ATX form factor

Order Info

Order No. Description Reference Status
65993 Qseven 2.0 module with Intel Atom E3815 SC 1.46GHz, 5W TDP, 1 GB DDR3L, GbE LAN, USB 3.0 Host, 6x USB 2.0 Host, UART, std. temp. MSC Q7-BT-15-1001 PCBFTX PV
65995 Qseven 2.0 module with Intel Atom E3815 SC 1.46GHz, 5W TDP, 2 GB DDR3L, GbE LAN, USB 3.0 Host, USB 3.0 Device, 3x USB 2.0 Host, USB 2.0 Host/Device, UART, std. temp. MSC Q7-BT-15-2008 PCBFTX OR
82310 Qseven 2.0 module with Intel Atom E3815 SC 1.46GHz, 5W TDP, 2GB DDR3L, 16GB eMMC Flash, GbE LAN, USB 3.0 Host, 5x USB 2.0, USB 2.0 Host/Device, UART, TPM, ind. temp. MSC Q7-BT-15-2402I PCBFTX PV
48938 Qseven 2.0 module with Intel Atom E3815 SC 1.46GHz, 5W TDP, 2 GB DDR3L, 4 GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0 Host, UART, ind. temp. MSC Q7-BT-15-2201I PCBFTX PV
48924 Qseven 2.0 module with Intel Atom E3825 DC 1.33GHz, 6 W TDP, 2 GB DDR3L, 4 GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0 Host, UART, ind. temp. MSC Q7-BT-25-2201I PCBFTX PV
48925 Qseven 2.0 module with Intel Atom E3826 DC 1.46GHz, 7 W TDP, 2 GB DDR3L, 4 GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0 Host, UART, ind. temp. MSC Q7-BT-26-2201I PCBFTX PV
82312 Qseven 2.0 module with Intel Atom E3826 DC 1.46GHz, 7W TDP, 4GB DDR3L, 16GB eMMC Flash, GbE LAN, USB 3.0 Host, 5x USB 2.0, USB 2.0 Host/Device, UART, TPM, ind. temp. MSC Q7-BT-26-4402I PCBFTX PV
65495 Qseven 2.0 module with Intel Atom E3827 DC 1.75GHz, 8 W TDP, 2 GB DDR3L, 4 GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0 Host, UART, ind. temp. MSC Q7-BT-27-2201I PCBFTX PV
66172 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10 W TDP, 2 GB DDR3L, GbE LAN, USB 3.0 Host, 4x USB 2.0 Host, UART, ind. temp. MSC Q7-BT-45-2006I PCBFTX PV
48927 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10 W TDP, 2 GB DDR3L, 4 GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0 Host, UART, TPM, ind. temp. MSC Q7-BT-45-2200I PCBFTX PV
48991 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10 W TDP, 4 GB DDR3L, GbE LAN, USB 3.0 Host, 6x USB 2.0 Host, UART, ind. temp. MSC Q7-BT-45-4001I PCBFTX PV
82316 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10W TDP, 4GB DDR3L, 16GB eMMC Flash, GbE LAN, USB 3.0 Host, 5x USB 2.0, USB 2.0 Host/Device, UART, TPM, ind. temp. MSC Q7-BT-45-4402I PCBFTX PV
48929 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10W TDP, 4GB DDR3L, ECC, GbE LAN, USB 3.0 Host, USB 3.0 Device, 3x USB 2.0, USB 2.0 Host/Device, UART, ind. temp. MSC Q7-BT-45-8005I PCBFTX OR
67047 Qseven 2.0 module with Intel Atom E3815 SC 1.46GHz, 5W TDP, 2GB DDR3L, 4GB SATA Flash, GbE LAN, USB 3.0 Host, 5x USB 2.0, USB 2.0 Host/Device, UART, TPM, ind. temp. MSC Q7-BT-15-20B2I PCBFTX PV
69460 Qseven 2.0 module with Intel Atom E3805 DC 1.33GHz, 3W TDP, 2GB DDR3L, 16GB eMMC Flash, GbE LAN, USB 3.0 Host, 5x USB 2.0, USB 2.0 Host/Device, UART, TPM, ind. temp. -- Processor & Module without any Graphics! MSC Q7-BT-05-2402I PCBFTX PV
69353 Qseven 2.0 module with Intel Atom E3815 SC 1.46GHz, 5W TDP, 2GB DDR3L, 8GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0, UART, std. temp. MSC Q7-BT-15-2301 PCBFTX PV
67758 Qseven 2.0 module with Intel Atom E3826 DC 1.46GHz, 7W TDP, 2GB DDR3L, 8GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0, UART, std. temp. MSC Q7-BT-26-2301 PCBFTX OR
82314 Qseven 2.0 module with Intel Atom E3827 DC 1.75GHz, 8W TDP, 4GB DDR3L, 32GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0, UART, ind. temp. MSC Q7-BT-27-4501I PCBFTX OR
65316 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10W TDP, 4GB DDR3L, 4GB eMMC Flash, GbE LAN, USB 3.0 Host, 5x USB 2.0, USB 2.0 Host/Device, UART, TPM, embedded DisplayPort Output (eDP), no LVDS, ind. temp. MSC Q7-BT-45-4207I PCBFTX OR
71625 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10W TDP, 2GB DDR3L, 8GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0, UART, ind. temp. MSC Q7-BT-45-2301I PCBFTX OR
71623 Qseven 2.0 module with Intel Atom E3845 QC 1.91GHz, 10W TDP, 4GB DDR3L, 4GB eMMC Flash, GbE LAN, USB 3.0 Host, 6x USB 2.0, UART, ind. temp. MSC Q7-BT-45-4201I PCBFTX OR
73499 Qseven 2.0 module with Intel Atom E3815 SC 1.46GHz, 5W TDP, 2GB DDR3L, GbE LAN, USB 3.0 Host, 6x USB 2.0, UART, ind. temp. MSC Q7-BT-15-2001I PCBFTX OR

PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessories

Carrier Options

Order No. Description Reference
67690 Qseven Rev. 2.0 compatible embedded platform (148 x 102mm), 10-28V input voltage, 1x RS232 on DB9 connector, 1x RS485 on pin header, 1x RS232 no handshake on pin header, dual RJ45 LAN connector with LED, 1x SATA, 1x mSATA slot, SD card holder, 1x USB 3.0 connector, 2x USB 2.0 connector, 1x USB 2.0 on pin row, 1x microUSB 2.0 OTG, CAN, I2C, LPC/GPIO on pin header, I2C/SMBus, SPI, DisplayPort connector, LVDS/eDP on JILI30 connector, regulated backlight supply, mini PCI Express slot, HD Audio, CMOS battery. Commercial temperature range 0..+70°C MSC Q7-MB-EP6-601 PCBFTX

Cooling Options

Order No. Description Reference
1114190 Passive Heatsink for Q7-BT, consisting of a single-piece aluminum profile with fins, through-hole distance bolts and through-holes in the heatrail part, with thermo pad for the thermal contact to the CPU. M3 mounting holes for an optional fan. Heatsink is also suitable for Q7-BW (all modules) and Q7-AL (only modules with Celeron/Pentium processor) MSC Q7-BT-01 HSI-001
1114178 Heatspreader for Q7-BT with through-hole distance bolts, only offers a 70x65mm aluminium plane to mount a heatsink or thermally connect to a cooler. Heatspreader is also suitable for Q7-BW (all modules) and Q7-AL (only modules with Celeron/Pentium processor) MSC Q7-BT-01 HSP-001
1137658 Passive Heatsink for Q7-BT, consisting of a single-piece aluminum profile with fins, threaded distance bolts and threaded holes in the heatrail part, and thermo pad for the thermal contact to the CPU. M3 mounting holes for an optional fan. Heatsink is also suitable for Q7-BW (all modules) and Q7-AL (only modules with Celeron/Pentium processor) MSC Q7-BT-02 HSI-001
1129447 Heatspreader for Q7-BT with through-hole distance bolts and threaded holes in the heatrail part, offers a 70x65mm aluminium plane to mount a heatsink or thermally connect to a cooler. Heatspreader is also suitable for Q7-BW (all modules) and Q7-AL (only modules with Celeron/Pentium processor) MSC Q7-BT-02 HSP-001
1137181 Heatspreader for Q7-BT with threaded distance bolts and through-holes in the heatrail part, offers a 70x65mm aluminium plane to mount a heatsink or thermally connect to a cooler. Heatspreader is also suitable for Q7-BW (all modules) and Q7-AL (only modules with Celeron/Pentium processor) MSC Q7-BT-04 HSP-001
82584 Heatspreader for Q7-BT/BW with through-hole distance bolts and 4 through-holes in the heatrail part, all holes for countersunk screws, offers a 70x65mm aluminium plane to mount a heatsink or thermally connect to a cooler. Heatspreader is also suitable for Q7-AL (only modules with Celeron/Pentium processor). MSC Q7-BT-07 HSP-001
1053769 Heat rail for Q7 baseboards. Recommended for conductive heat transfer from the Q7 module to the Q7 baseboard. Already assembled on all MSC baseboards. MSC Q7-XXX-01 HTR-001

Starter Kits

Order No. Description Reference
46995 Starterkit for MSC Q7-BT/BW modules. Includes MSC Q7-MB-EP6 Baseboard, Power Supply, Cable Kit and Heatsink. Please order the Q7-BT/BW module of your choice separately. MSC Q7-SK-BT-EP6-KIT001

Support










Win 10-64bit






Win 8-32bit






Win 8-64bit






Win 7-32bit





Win 7-64bit







Win ES7-32bit-64bit

Win E8S-32bit-64bit



MSC EAPI WinXP Win7 Win10 x86 x64

MSC EAPI Linux

Copyright ©2021 Avnet, Inc. All rights reserved.