Avnet Embedded is becoming Tria! Visit our new website here.

MSC Q7-IMX6PLUS

NXP™ i.MX6 ARM® Cortex™-A9

The design of the MSC Q7-IMX6PLUS module was optimized to provide an especially economic platform for NXP’s i.MX6 and i.MX6Plus CPUs offering quad-core, dual-core and single-core ARM® Cortex™-A9 compute performance at very low power consumption and excellent graphics performance combined with a high degree of functional integration.

The MSC Q7-IMX6PLUS CPU Module provides a choice of computing performance ranging from economic single-core to high-performance quad-core power in combination with a high graphics performance and low power consumption available over a wide temperature range.

It incorporates the i.MX 6 (Solo, DualLite, Dual or Quad) or the i.MX 6DualPlus or 6QuadPlus processor with up to 1.2 GHz, up to 4GB DDR3 DRAM and up to 64GB eMMC Flash memory as well as an extensive set of interface controllers. The module provides the new Qseven Rev. 2.0 interface, allowing easy integration with Qseven baseboards.

For evaluation and design-in of the Q7-IMX6PLUS modules, MSC provides a development platform, target platform and a starter kit. The MSC Q7-IMX6PLUS module is supported by Linux.

Highlights

  • NXP™ i.MX 6 ARM® Cortex™-A9 Solo, DualLite, Dual, Quad, DualPlus and QuadPlus processor
  • MPEG-4 Video Encoding/Decoding 1080p
  • HDMI graphics 1920 x 1080 x 30fps
  • Dual-channel LVDS 1920 x 1080 x 30fps
  • Up to 4GB DDR3L SDRAM
  • Up to 64GB eMMC Flash
  • Gigabit Ethernet Interface
  • 1x PCI Express x1
  • 1x SATA-II (3Gbps, quad-/dual-core only)
  • 1x USB Device/Host + up to 4x USB 2.0
  • 1x MMC/SD/SDIO Interface
  • CAN Interface
  • I2S Audio Interface
  • MIPI CSI-2 Camera Interface (optional)
  • Micro SD Card Socket

Specs

Technology ARM
Formfactor Qseven 2.0
CPU NXP™ i.MX 6 ARM® Cortex™-A9:
- i.MX 6QuadPlus, quad-core, 800MHz…1.2GHz
- i.MX 6Quad, quad-core, 800MHz…1.2GHz
- i.MX 6DualPlus, dual-core, 800MHz…1.2GHz
- i.MX 6Dual, dual-core, 800MHz…1.2GHz
- i.MX 6DualLite, dual-core, 800MHz…1.0GHz
- i.MX 6Solo, single-core, 800MHz…1.0GHz
Chipset SOC
RAM Up to 4GB DDR3L SDRAM (DDR-1066), soldered
Flash Up to 64GB eMMC Flash (optional) or
Up to 1GB SLC NAND Flash (optional)
Storage Interfaces Micro SD Card Socket (optional)
1x MMC/SD/SDIO
1x SATA-II (3Gbps, not supported by Solo/DualLite CPU)
USB 1x USB 2.0 Host/Client, 1x USB 2.0 Host or
1x USB 2.0 Host/Client, 4x USB 2.0 Host (optional)
Serial Interfaces UART
Bus Interfaces 1x PCI Express x1
1x CAN 2.0B
1x I2C up to 400 Kbit/s
1x SPI (with two chip selects)
1x SMBus
Display Controller Video, 2D and 3D Graphics Units integrated in i.MX6 Processor
OpenGL® ES 1.1/2.0/Halti, OpenVG™ 1.1, OpenCL™ 1.1 EP
Multi-Format Hardware Video Encoder/Decoder
Display Interfaces Dual-channel LVDS interface, 18 or 24 bit (up to 1920x1080). Also usable as 2x single-channel LVDS interface (up to 1366x768)
HDMI V1.4 up to WUXGA (1920x1080) incl. Full-HD @ 30fps
MIPI CSI-2 Camera Interface (optional, Feature Connector)
Network Interface 1x 10/100/1000BASE-T Ethernet
Audio Interface I2S Audio
Miscellaneous Watchdog Timer for system reset (programmable, 1s … 600s)
8x GPIO, configurable as input or output
2kbit ID EEPROM on SMBus
Feature Highlights FEATURE HIGHLIGHTS DATA HERE!
OS Support Linux Board Support Package
Power Requirement Power Supply +5V +/-5%, 5V Standby
Power Consumption 4-6 W typ. (depending on CPU and optional features)
Environment Temperature Range:
0°C … +70°C operating commercial
-40°C … +85°C operating extended
-40°C … +85°C storage
Humidity:
5 … 95% (operating, non condensing)
5 … 95% (storage, non-condensing)
Dimensions 70 x 70 x 13 mm with heat spreader installed
Certificates UL / CE

Order Info

Order No. Description Reference Status
66762 Qseven module based on NXP i.MX6S Single-Core Cortex-A9 processor at 800MHz, 1GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 512MB NAND Flash, micro SD socket, no SATA, 1x PCIe, 1x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; industrial temperature -40...+85°C MSC Q7-IMX6PLUS-111 PCBFTX PV
66764 Qseven module based on NXP i.MX6S Single-Core Cortex-A9 processor at 800MHz, 1GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 4GB eMMC Flash, micro SD socket, no SATA, 1x PCIe, 4x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; industrial temperature -40...+85°C MSC Q7-IMX6PLUS-112 PCBFTX PV
66710 Qseven module based on NXP i.MX6D Dual-Core Cortex-A9 processor at 800MHz, 2GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 4GB eMMC Flash, micro SD socket, 1x SATA, 1x PCIe, 4x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; industrial temperature -40...+85°C MSC Q7-IMX6PLUS-123 PCBFTX PV
67693 Qseven module based on NXP i.MX 6DualPlus Dual-Core Cortex-A9 processor at 800MHz, 2GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 4GB eMMC Flash, micro SD socket, 1x SATA, 1x PCIe, 4x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; industrial temperature -40...+85°C MSC Q7-IMX6PLUS-163 PCBFTX PV
66766 Qseven module based on NXP i.MX6DL Dual-Lite Cortex-A9 processor at 800MHz, 2GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 4GB eMMC Flash, micro SD socket, no SATA, 1x PCIe, 4x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; industrial temperature -40...+85°C MSC Q7-IMX6PLUS-133 PCBFTX PV
66768 Qseven module based on NXP i.MX6Q Quad-Core Cortex-A9 processor at 800MHz, 2GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 4GB eMMC Flash, micro SD socket, 1x SATA, 1x PCIe, 4x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; industrial temperature -40...+85°C MSC Q7-IMX6PLUS-143 PCBFTX PV
67692 Qseven module based on NXP i.MX 6QuadPlus Quad-Core Cortex-A9 processor at 800MHz, 2GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 4GB eMMC Flash, micro SD socket, 1x SATA, 1x PCIe, 4x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; industrial temperature -40...+85°C MSC Q7-IMX6PLUS-183 PCBFTX PV
69932 Qseven module based on NXP i.MX 6QuadPlus Quad-Core Cortex-A9 processor at 1GHz, 2GB DDR3 soldered, integrated Graphics, HDMI max. 1920x1080, dual-channel LVDS, Ethernet controller (10/100/1000Base-T), 4GB eMMC Flash, micro SD socket, 1x SATA, 1x PCIe, 4x USB2.0 Host, 1x USB2.0 Host/Client, I2S Audio; commercial temperature 0…70°C MSC Q7-IMX6PLUS-083 PCBFTX OR

PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessories

Carrier Options

Order No. Description Reference
39698 Power supply Unit with connector for Q7-MB-EPx baseboards. Provides 12V and 5V power. Does not include power cable from wall to PSU, please order optionally 40188 (US) or 35512 (EU). Optionally 35513 is a suitable combined SATA data and power cable. MSC Q7-MB-EP-PSU1
40824 Qseven embedded platform (148 x 102 mm), 10-28V input voltage, 1x RS232 on pin row, 1x RS232 debug port, dual RJ45 LAN connector with LED, 1x SATA, 1x mSATA con., SD card holder, 2x external USB, 1x USB Host/Client, 1 intern USB, I2C, SMBus, SPI, DVI + LVDS, touch screen support, regulated backlight supply, mini PCI Express socket, AC97 Audio codec, Audio on pin row, CMOS battery, system fan support. Extended temperature range -20..+85°C MSC Q7-MB-EP4-001 PCBFTX

Cooling Options

Order No. Description Reference
1128531 Heatspreader with unthreaded distance bolts for Q7-IMX6Plus module with flip-chip processor package (all single-core & dual-lite versions, all standard temperature versions) MSC Q7-IMX6-03 HSP-001
1128532 Heatspreader with unthreaded distance bolts for Q7-IMX6Plus module with lidded processor package (extended temperature versions of dual- and quad-core only) MSC Q7-IMX6-03 HSP-002
1053769 Heat rail for Q7 baseboards. Recommended for conductive heat transfer from the Q7 module to the Q7 baseboard. Already assembled on all MSC baseboards. MSC Q7-XXX-01 HTR-001

Other Accessories

Order No. Description Reference
40402 Debug Console (UART) Adapter for i.MX6-based Qseven and nanoRISC modules, with 8-pin FFC cable to connect COM module to 9-pin D-Sub connector MSC Debug Console Adapter
67822 Debug Adapter for i.MX6-based Qseven, SMARC and nanoRISC modules, with 8-pin FFC cable to connect to COM module, adapter provides headers for JTAG connection to Lauterbach and/or Goepel debuggers MSC JTAG Adapter FFC 8-pin

Starter Kits

Order No. Description Reference
43885 Starterkit for MSC Q7-IMX6(PLUS) modules. Includes MSC Q7-MB-EP4-001 Baseboard, Heatspreader, Console Adapter, SD Card with Linux OS installation and Power Supply. Does not include MSC Q7-IMX6(PLUS) module. Please order your choice of MSC Q7-IMX6(PLUS)-xyz PCBFTX separately. MSC Q7-SK-IMX6-EP4-KIT001 SETPAC

Support




















Copyright ©2024 Avnet, Inc. All rights reserved.