Avnet Embedded is becoming Tria! Visit our new website here.

MSC Q7-SK-AL-EP6

Starterkit for Qseven Modules with Atom E3900

The Qseven Starter Kit for Qseven modules with the Intel “Apollo Lake” E3900 is based on a 3.5″ Qseven rev. 2.0 carrier board MSC Q7-MB-EP6 and contains all necessary products to quickly enable the user to run and evaluate the Q7-AL module range. The kit does not contain a Qseven module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired. As part of the Qseven Starter Kit, the appropriate heatspreader will be supplied. A power supply with cable kit is also included for convenience. Direct screen output on a DP monitor is possible using the on-board DP connector.

Highlights

  • 3.5″ Qseven carrier board with socket for Qseven Rev. 2.0 module
  • Heatspreader with heatsink for all module variants of the Q7-BW family
  • 12V power supply and cable kit included for immediate operation of the Starter Kit
  • Resource USB Flash stick with drivers, manuals etc.
  • DP graphics output
  • LVDS graphics output on standard 30-pin connector; backlight connector includes adjustable backlight voltage and dimming
  • 2x Ethernet (10/100/1000 LAN) connector, 1x SATA connector
  • USB 3.0, 3x USB 2.0, 1x microUSB OTG, 2x UART, SD-Card socket, miniPCIexpresss and mSATA slots
  • Getting Started manual
  • Optional 7″ WVGA (800 x 480) and 12.1″ XGA (1024×768) TFT kit

Specs

Formfactor Qseven
Storage Interfaces SATA connector
mSATA card slot
SD Card slot
USB 1x USB 3.0 Host
3x USB 2.0 Host
1x USB 2.0 Host/Device on µUSB Connector
Serial Interfaces RS-232 and RS-485 from UART0
RS232 from UART2
Bus Interfaces CAN
LPC
MiniExpressCard slot
Display Interfaces DisplayPort
Dual-Channel LVDS 18/24 Bit
Network Interface 2x 10/100/1000 LAN
(one from module, one from LAN Ctrl.)
Audio Interface HD Audio on pin row
Power Requirement 4-pin power connector 10..28VDC
Environment Operating Temperature
0° … 70°C (operating)
-20°… 85°C (storage)
Humidity
20 … 80% (operating, non-condensing)
5 … 95% (storage, non-condensing)
Dimensions 148 x 102 mm
Certificates UL / CE
Cooling Heatsink included
Carrier MSC Q7-MB-EP6 Qseven 2.0 carrier

Order Info

Order No. Description Reference Status
70252 Qseven Starterkit for Qseven modules with Intel Atom E39xx (Apollo Lake) processor. Consists of a Qseven baseboard MSC Q7-MB-EP6-601, Heatsinks, 12V power supply and cable kit. Does not contain Qseven module Q7-AL- xyz, please order separately! MSC Q7-SK-AL-EP6-KIT001 PV

PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessories

10.1″ Display kit

Order No. Description Reference
78879 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch). MSC DIS-AM1280800-101-KIT SETPAC

12.1″ Display kit

Order No. Description Reference
78880 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM1280800-121-KIT SETPAC

5.0″ Display kit

Order No. Description Reference
81871 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 5.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM800480-050-KIT SETPAC

7″ Display kit

Order No. Description Reference
78911 Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch) MSC DIS-AM800480-070-KIT SETPAC

Support


Copyright ©2024 Avnet, Inc. All rights reserved.