MSC SM2-MB-EP1

SMARC™ 2.0 Carrier Board

The new SMARC™ 2.0 embedded platform MSC SM2-MB-EP1 offers a variety of interfaces commonly used in embedded applications such as Gigabit Ethernet, SATA, USB 3.0, USB 2.0 Host, USB 2.0 Client, RS232, CAN, SPI, I2C as well as LVDS/eDP, DisplayPort and HDMI display interface and regulated backlight supply.

In addition a PCI Express x4 slot, a mini PCI Express slot and one SD Card socket are supported to extend the functionality of the carrier board. To complete the feature set HD or I2S Audio and a MIPI CSI-2 camera interface are offered.

The SMARC™ module slot of the EP1 platform is placed on the top side of the carrier board, which comes in the Mini-ITX form factor allowing easy integration into standard Mini-ITX enclosures.

Highlights

SMARC™ 2.0 carrier board for full size and short size modules
HDMI and DisplayPort connectors
LVDS and eDP connectors
Regulated backlight supply
Two Gigabit Ethernet ports
PCI Express x4 slot
Mini PCI Express Card slot
One SATA connector
Two USB 3.0 host ports
Two USB 2.0 host ports
One USB 2.0 OTG port

RS232 on DB9 connector
CAN on DB9 connector
SPI, eSPI, SMBus, I2C and GPIO
HD or I2S audio interface
MIPI CSI-2 camera interface
SD Card socket
Fan connector
CMOS battery
ATX Power Connector or single 12V/24V power jack
Mini-ITX Form Factor (170 x 170 mm)

Specs

Technology	Carrier
Formfactor	Mini-ITX
Flash	SD Card Socket
Storage Interfaces	1x SATA-II (3Gbps) connector, separate floppy type power connector
USB	2x USB 3.0 host port 2x USB 2.0 host port 1x USB 2.0 OTG port (MicroUSB) 1x USB 2.0 on Mini PCI Express slot
Serial Interfaces	1x RS232 (UART0) on DB9 connector with 2-wire hand shake 1x RS232 (UART1) on pin header w/o hand shake
Bus Interfaces	PCI Express lanes from module can be connect to either 1x PCI Express x4 Gen.2 slot or 1x Mini PCI Express x1 Card slot 1x CAN 2.0B on DB9 connector 1x CAN 2.0B on pin header 1x eSPI connector SPI, SMBus, I2C, and GPIO on pin header
Display Controller	DisplayPort connector HDMI connector 40-pin eDP connector LVDS on Jili30 connector with EEPROM for display data and backlight connector MIPI CSI-2 camera interface on 15pin FFC connector
Network Interface	2x 10/100/1000BASE-T Ethernet on RJ45 connector, with two integrated status LED‘s
Audio Interface	HD or I2S Audio codec, routed to three audio jacks
Miscellaneous	4-pin fan connector, PWM controlled by module Socket for CR2032 type RTC battery (3V) Serial EEPROM for board data Serial EEPROM for LVDS display data SPI Boot Flash, socket Power and Reset button Configuration switches/jumper
Feature Highlights	SMARC™ 2.0 carrier board for full and short size modules Support of listed carrier board features and interfaces depends on used module
Environment	Temperature Range: 0°C … +60°C operating -20°C … +85°C storage Humidity: 5 … 90% (operating, non condensing) 5 … 90% (storage, non-condensing)
Dimensions	170 x 170 mm
Certificates	UL / CE

Order Info

Order No.	Description	Reference	Status
68488	SMARC 2.0 Embedded Platform with PCI Express x4 slot, GbE, SATA, USB 3.0, USB 2.0, USB 2.0 OTG, RS232, CAN, SPI, eSPI, SMBus, I2C and GPIO interface, LVDS/eDP, DisplayPort and HDMI display interface, regulated backlight supply, HD/I2S audio interface, MIPI CSI-2 camera interface, mini PCI Express card slot, SD card slot, fan connector, CMOS battery, Mini-ITX form factor (170 x 170 mm), ATX power connector and single 12V/24V power jack, commercial temperature range 0..+70°C	MSC SM2-MB-EP1-001 PCBFTX

PV = Preferred variant; OR = on Request (in OEM quantities only)

Accessories

10.1″ Display kit

Order No.	Description	Reference
78879	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch).	MSC DIS-AM1280800-101-KIT SETPAC

12.1″ Display kit

Order No.	Description	Reference
78880	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)	MSC DIS-AM1280800-121-KIT SETPAC

5.0″ Display kit

Order No.	Description	Reference
81871	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 5.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)	MSC DIS-AM800480-050-KIT SETPAC

7″ Display kit

Order No.	Description	Reference
78911	Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)	MSC DIS-AM800480-070-KIT SETPAC