The SMARC 2.0 Starterkit for SMARC modules with the NXP i.MX6 processors is based on a Mini-ITX SMARC 2.0 carrier board MSC SM2-MB-EP1 and contains all necessary products to quickly enable the user to run and evaluate the SM2S-IMX6 module range. The kit does not contain a SMARC module in order to give the user greater flexibility as to which particular module version and CPU speed variant is desired. As part of the SMARC 2.0 Starterkit, the appropriate Heatspreader and a Flash SD Card will be supplied. A bootable Linux installation can be downloaded from the MSC Support website and stored on the SD Card. A power supply with cable kit is also included for convenience. Direct screen output on a PC monitor is possible using the on-board DP and HDMI output. As an option to the Starter Kit several suitable LCD kits of various resolutions and sizes are available upon request.
SMARC 2.0 carrier board in Mini-ITX format with socket for SMARC 2.0 modules
Heatspreader suitable for all module variants of the SM2S-IMX6 module family
12V power supply and cable kit included for immediate operation of the Starterkit
Bootable Linux installation on Support Website, can be stored in SD Card (supplied with Card Reader)
DP and HDMI graphics output
LVDS graphics output on standard 30-pin connector; backlight connector includes adjustable backlight voltage and dimming
Ethernet (10/100/1000 LAN) connector
SATA, 4x USB 2.0 Host, USB Host/Client, UART, SD-Card socket
Getting Started manual
Optional TFT kits available
Kit with Carrier
1x SATA-II (3Gbps) connector
2x USB 3.0 host port
2x USB 2.0 host port
1x USB 2.0 OTG port (MicroUSB)
1x USB 2.0 on Mini PCI Express slot
1x RS232 (UART0) on DB9 connector with 2-wire hand shake
1x RS232 (UART1) on pin header w/o hand shake
PCI Express lanes from module can be connect to either
1x PCI Express x4 Gen.2 slot or
1x Mini PCI Express x1 Card slot
1x CAN 2.0B on DB9 connector
1x CAN 2.0B on pin header
1x eSPI connector
SPI, SMBus, I2C, and GPIO on pin header
40-pin eDP connector
LVDS on Jili30 connector with EEPROM for display data and backlight connector
MIPI CSI-2 camera interface on 15pin FFC connector
10/100/1000BASE-T Ethernet on RJ45 connector
I2S Audio codec, routed to three audio jacks
4-pin fan connector, PWM controlled by module
Socket for CR2032 type RTC battery (3V)
Serial EEPROM for board data
Serial EEPROM for LVDS display data
SPI Boot Flash, socket
Power and Reset button
Confi guration switches/jumper
SMARC™ 2.0 carrier board for full and short size modules
Support of listed carrier board features and interfaces depends on used module
Starter Kit for MSC SM2S-IMX6 modules. Includes MSC SM2-MB-EP1 Baseboard, Heatspreader, SD Card with USB SD Card Reader and Power Supply. A bootable Linux image can be downloaded from the MSC Support Website. The StarterKit does not include the MSC SM2S-IMX6 module. Please order your choice of MSC SM2S-IMX6-XYZ module separately.
PV = Preferred variant; OR = on Request (in OEM quantities only)
10.1″ Display kit
Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 10.1" WVGA LCD with PCAP Touch Sensor and Touch Controller. Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch).
MSC DIS-AM1280800-101-KIT SETPAC
12.1″ Display kit
Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 12.1" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)
MSC DIS-AM1280800-121-KIT SETPAC
5.0″ Display kit
Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 5.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)
MSC DIS-AM800480-050-KIT SETPAC
7″ Display kit
Displaykit suitable for all COM Carrier Boards and all COM Starterkits. Comprises 7.0" WVGA LCD with PCAP Touch Sensor and Touch Controller Includes all cables required to connect to COM Carrier Boards (LVDS, B/L & Touch)
Your privacy is important to us.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Google Analytics Cookies
These cookies collect information that is used either in aggregate form to help us understand how our website is being used or how effective our marketing campaigns are, or to help us customize our website and application for you in order to enhance your experience.
If you do not want that we track your visit to our site you can disable tracking in your browser here:
Other external services
We also use different external services like Google Maps, Google reCaptcha and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds: