- ...
- base images
- SDK
- ...
- setup hardware
- configure
- ...
- download
- flash
- configure hardware
Select peripherals support and display (sm2s-imx95) [2]#
To configure those you’ll find on your SDCard a file called uEnv.txt that will hold any
custom u-boot setting.
To change the peripheral support settings add or change the line
fdt_overlay=<overlay 1> <overlay 2>...
for example
fdt_overlay=overlay-baseboard-ep5.dtb overlay-lvds-ama-101a01.dtb
would activate support for EP5 carrier board and an AMA101(A01) display. The file can be edited with any ordinary text editor on your computer.
To apply
insert the SDCard again
power up the board again
Available peripherals#
Peripheral |
overlay file |
|---|---|
EP1 carrier board |
baseboard-ep1.dtbo
|
EP5-001 carrier board [1] |
overlay-baseboard-ep5-gpioexpander.dtb
|
EP5-002 carrier board |
overlay-baseboard-ep5.dtb
|
EP5-005 carrier board [1] |
overlay-baseboard-ep5-gpioexpander.dtb
|
EP5-006 carrier board |
overlay-baseboard-ep5.dtb
|
OV5640 camera (channel 0) |
cam-csi0-ov5640.dtbo
|
OV5640 camera (channel 1) |
cam-csi1-ov5640.dtbo
|
AMA070 display (channel 0) |
display-lvds0-ama-070a04.dtbo
|
AMA101(A01) display (channel 0) |
display-lvds0-ama-101a01.dtbo
|
AMA101(A07) display (channel 0) |
display-lvds0-ama-101a07.dtbo
|
AMA121 display (channel 0) |
display-lvds0-ama-121a01.dtbo
|
AMA070 display (channel 1) |
display-lvds1-ama-070a04.dtbo
|
AMA101(A01) display (channel 1) |
display-lvds1-ama-101a01.dtbo
|
AMA101(A07) display (channel 1) |
display-lvds1-ama-101a07.dtbo
|
AMA121 display (channel 1) |
display-lvds1-ama-121a01.dtbo
|
AMA156 display |
overlay-lvds-ama-156a01.dtb
|
G156HCE-L01 Display Channel 0 |
display-lvds2-inl-g156hce-l01.dtbo
|
Extra SMARC pins |
overlay-extra-smarc-pins.dtb
|
See also
Our community overlays at meta-dts-community
Notes